Note: Will Only Fit 3.5in Axle-Dsl
Note: FREE SHOCK BOOT COVERS
Features:
- Black Shock Boot Covers, To Protect Shock From Dust and Debris Included Free Of Charge With This Purchase.
- Unique upper and lower control arm relocation bracket design.
- Heavy 1/4in steel construction.
- No cutting of the frame required.
- High performance at a low price.
Notes:
- 2-piece rear driveshaft requires carrier bearing drop kit D5505
- Will not fit dually applications
- Rear axle diameter will be 3.5in or 4in, measure before ordering
- Minor trimming may be required with some tire/wheel combinations. A front bumper spacer kit (D5801) is available to gain clearance if necessary
- Depending on the factory transmission mount, in rare cases some 8in kits may not require the transfer case indexing kit. See installation instructions for details.
- Lift springs are designed for diesel models only.
Quick Specs
- Front Lift Height: 8 Inch
- Front Lift Method: Coil Springs
- Rear Lift Height: 5 Inch
- Rear Lift Method: Block Kit
- Install Time Hrs: 6-8
- Difficulty Level 1-5: 3
- Wheel Size: 17 X 9
- Back Spacing: 4.5-5 Inch
- Max Tire Size: 38 X 13.50
The Zone Dodge Ram 1500 pickup 6in Suspension Kit System for 2009-2011models is centered around two main crossmembers that are locked together with a substantial differential skid plate. CNC machined steering knuckle correct steering geometry while reducing installation time. Strut top spacers are used to lift the vehicle and maintain the factory ride. Strut dissaseembly is only required if the optional preload spacers included in the kit are used. The rear is lifted with new Zone coil springs, track bar relocation and a rear four link relocation system. Two rear lift height options are available and when combined with the included optional front pre-load spacers, really allows you to fine tune the stance of your truck.
- UPC: 655623719541
- Brand: Zone OffRoad
- 2008 Dodge Ram 2500
Video
Safe & Secure Shopping
Copyright © 2024. All Rights Reserved
- Some one
- New York