Zone OffRoad 2013-2015 Dodge Ram 1500 4WD 6/3in Suspension Lift Kit With Free Shock Boot Covers ZOND40N

Note: FREE SHOCK BOOT COVERS

Features:

• Black Shock Boot Covers, To Protect Shock From Dust and Debris Included Free Of Charge With This Purchase.
• Front top strut spacer and preload spacer
• Maintains handling and ride charateristics and works with factory stability control
• 3in or 5in rear lift option
• Differential skid plate included
• CNC machined steering knuckles

Notes:

• Not recommended for AWD models.
• Will not fit adjustable air suspension equipped models
• These trucks are typically between 1in and 3in tail high from the factory. Please measure your trucks factory ride heights first and order the appropriate rear lift height.
• TRX models will achieve approximately 1in of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4in lift system for about 5in of lift or replace the TRX struts with standard struts for use with this system.

Quick Specs

• Front Lift Height: 6 Inch
• Front Lift Method: Upper Strut Mounts
• Rear Lift Height: 3 Inch / 5 Inch
• Rear Lift Method: Coil Springs
• Install Time Hrs: 8-10
• Difficulty Level 1-5: 3
• Wheel Size: 17 x 9
• Back Spacing: 4.5 Inch
• Max Tire Size: 37x12.50
• Wheel Size: 18x9
• Back Spacing: 5 Inch
• Max Tire Size: 37x12.50
• Wheel Size: 20x9
• Back Spacing: 5 Inch
• Max Tire Size: 37x12.50

This new Zone Offroad 6in suspension system for the 13-15 Dodge Ram 1500 is performance packed and budget friendly for those looking to get 37in tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4in steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control. In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is 10 also for trucks featuring a stock 2-piece rear driveshaft.

Brand: Zone OffRoad

• 2013-2015 Dodge Ram 1500