JKS 2007-2018 Jeep Wrangler JK Control Arm Correction Brackets JKS6200

Special Notes:

• Requires 2" of front bump stop extension for adequate clearance at full suspension compression. JKS 2" bump stop extension are available separately (#1120)
• Can be used in conjunction with JKS or other aftermarket control arms that can be set to factory length.
• Designed for use with 2"+ lift. Ideal lift range is 2"-4.5" but can be used up to 6".
• Do not combine with any other drop/relocation brackets

Features:

• Wrangler JK, 2007-2018, Control Arm Correction Bracket; Powder Coated; Bolt-on

 

Designed to improve control arm operating angle and mimic factory suspension geometry, these control arm correction brackets improve on-road handling and control. The design allows your lifted Wrangler to more naturally roll over bumps and grooves in the road so the coils and shocks operate as they were designed to smooth out handling. Corrects caster for 2"-4.5" of lift. The new upper and lower control arm mounting holes are precisely positioned to provide the correct caster at the listed lift heights. The upper control arm mount provides two hole positions for proper caster settings through the full lift height range. The proper mounting locations for the installed lift heights are outlined in the installation instructions. Improves the front drive shaft CV joint operating angles through full wheel travel. On 2012-2018 JK models, the new geometry increases clearance between the front driveshaft and exhaust at full suspension droop Brackets are made from heavy-duty 7GA steel and are fully boxed and welded for superior strength when compared to bolt together 2-piece designs. The brackets install inside the factory upper and lower control arm mounts with the factory hardware. The heavy boxed construction, fully gusseted lower mount and welded crush sleeves give you extra confidence both on and off road. The Control Arm Correction Brackets can be used with JKS adjustable control arms for the ultimate on and off road performance.

WHY JSPEC:
JSPEC™ Suspension by JKS products deliver American Ingenuity and Workmanship to consumers without compromising performance or dependability. JSPEC™ Suspension by JKS are comprised of JKS Manufacturing components, the best and most trusted Jeep® accessories in the industry.

Specifically Jeep®
The JSPEC™ Suspension by JKS represents Jeep®-specific engineering at its best. With more than 60 years of combined experience centered around this iconic 4WD legend, our expert team of industry specialists understand the Jeep® lifestyle inside and out.

American Made
While many of our competitors are having their products produced overseas, we remain committed to manufacturing and assembling every JSPEC™ Suspension product here at home. When we say that JSPEC™ Suspension products are "Made in USA", that is exactly what we mean.

Simplicity
Right from the start, every JSPEC™ Suspension by JKS product is designed for trouble-free operation and dependable performance. We strive for elegant simplicity because unexpected complications can quickly turn any adventure into a disaster.

Superior
JSPEC™ Suspension by JKS products are always developed to enhance the Jeep® ownership experience. Our customers rely on their vehicles for so much more than off-road performance and we guarantee our products to excel in all environments.

Brand: JKS

• 2007-2018 Jeep Wrangler JK 

 

Video