Papago's slim and compact GS272 GoSafe Dashcam is packed with powerful hardware and driver safety features to keep you safe while it captures your commute or road trip in full 1080p HD at 30fps. Its 1/3" 2MP CMOS image sensor, combined with a built-in microphone to capture cabin audio, ensures that every aspect of the drive is captured. The microphone can be muted for privacy concerns or to save memory. Footage is saved to a microSD card, and with a 32GB card installed up to 5.3 hours can be stored at 1080p.
Recording begins automatically when the car is turned on, and automatically overwrites the oldest files first when the memory card is full. In addition to capturing your daily driving, the GoSafe has several passive driver safety features to help you avoid accidents. A driver fatigue alarm can be set to periodically go off to remind you to rest at 30 min, 1 hr, or 2 hr intervals for long road trips. The camera can identify and register speed limit signs, and alert you if you are exceeding the posted limit. Headlight reminders can be set to notify you when it's time to turn on your lights. Finally, a Stop-and-Go function signals an alert when the car in front of you has started moving after you and it have been stopped for at least 10 seconds.
Even when you're parked, the GoSafe can still be on the job. Using the permanently installed rechargeable battery, the dash-cam can be set to Hibernate mode. Put it in this mode, and goes into a power-saver mode where it will stop recording while continuing to monitor its field of view. If motion is detected, the GoSafe reactivates itself and begins recording in preset intervals.
Estimated Recording Times:
|LCD Display||2.4″ LCD color screen|
|Image Sensor||2M 1/3 CMOS Sensor|
|Main Chip||2014 New Altek wafers|
|Lens||140° wide viewing angle|
|Lens structure||Full HD Illumination Sensor, glass lens|
|Video Format||1080p30/720p60/720p30 /.avi|
|Storage Memory||Class 10 MicroSDHC card (8GB Min-32GB Max) *Please note that some cards may be incompatible- e.g., Sandisk.|
|HDMI||HDMI 1.3 1080p output|
|LED Instruction Light||Red and green indicator light|
|Internal Battery||Li-Polymer 420mAh|
|Power Supply||12-24V DC input / 5V/1A output|
|Power Consumption||4.75V~5.25V / 1A|
|Operating Temperature||14°~149°F/ -10°~65°C|
|Dimension||2.1″ x 3.2″x 0.5″|
Write the First Review!
You must login to post a review.