SUPERLIFT 1980-1996 Ford Bronco 4" Superunner Radius Arm Lift Kit K385/86040X4

NOTE: Optional extended length brake hoses recommended. Our front sway bar relocation kit is suggested if full suspension articulation is desired. The optional Superunner Steering System conversion is Highly Recommended for Optimal Steering Performance.

Features:

• For the rear, a 2.5 inch rear block comes complete with proven cast steel blocks, U-bolts, nuts and washers.
• Included in this system is a set of four (4) Superlift hydraulic shocks absorbers. Superide shock absorbers are designed to provide excellent ride quality, durability and longevity. They feature 10-stage, velocity-sensitive valving for maximum control on or off-road without sacrificing a comfortable ride. Shock resistance is continually adjusted, depending on the terrain and vehicle speed.
• SUPERLIFT provides detailed instructions suitable for both do-it-yourselfers (DIY) or for installing dealers.
• This SUPERLIFT system is designed for the 1980-1996 Ford Bronco owners looking to gain more ground clearance, wheel travel flexibility and a straight-up stance. Our K385 addresses all of your lift kit needs in terms of product quality, durability, craftsmanship, and price. It includes everything you need to lift your legendary Ford F-150. SUPERLIFT does have personalized options and upgrades to enhance your install plus steering & handling performance.
• Front: Coil springs (1 pair); drop axle pivot brackets (2); extended length Superunner radius arms (2); radius arm bushings (4); Supplied Hardware; drop pitman arm (1); Superlift Shocks (2).
• Rear: Rear block kit; 2.5 inch cast steel blocks (2); U-bolts (4); heavy-duty flat washers (8); U-bolt long nuts; Superlift Shocks (2)
• This is a complete Superunner extended radius arm suspension lift kit for the 1980-1996 Ford Bronco or F-150 4WD
• Provides 4 inch � lift height
• Includes rear blocks, front and rear Superlift shocks

Include:

• Coil springs, radius arms, axle pivot brackets, shocks, drop pitman arm, rear block and u-bolt kit, and all hardware required specific to the 1980-1996 4WD Ford Bronco or or F-150.
• Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installatio

This is the SUPERLIFT 4 Inch suspension lift kit for the 1980-1996 Ford Bronco or F-150 4WD . With a SUPERLIFT suspension and more tire, your third-generation Ford Bronco will have an awesome stance and more off-road ground clearance. This SUPERLIFT system is designed for owners looking to gain more ground clearance, wheel travel flexibility, and a straight-up stance. 1980 was the first time Ford used a 2-piece front axle, coil springs and radius arms on their full-size Ford Bronco/F-150. Ford called this version of their Independent Front Suspension (IFS) the Twin Traction Beam (TTB). The TTB axle is comprised of two beams that are mounted on pivots, with the tire at one end, and the pivot at the other. The pivots from both sides cross over center. 2WD versions were called Twin-I Beam. The rear suspension remained a solid axle with leaf springs on both 4WD & 2WD models. As the front ride height is raised on the TTB, the tops of the tires lean outward creating positive camber angle. With lifts over 2 inches, caster and camber angles must be addressed.

Brand: Superlift

•  1980-1996 Ford Bronco 

Video