Zone OffRoad 2019-2022 Dodge Ram 2500 4.5in Diesel 6 bolt T-case Radius Arm Lift Kit ZOND78

Features:

• Heavy Duty 1/4in Steel, Laser Cut, Internally Gusseted Radius Arms Improve Strength, Offer More Ground Clearance And Correct Caster
• High Strength Progressive Rate Front Coil Springs For A Great Ride On Any Terrain
• F/r Hd Track Bar Relocation Brackets To Correctly Position Both Axles Under The Truck
• Forged Drop Pitman Arm To Corect Steering Angles
• F/r Sway Bar Correction To Maintain Handling Performance
• Hd Transmission Crossmember And T-case Indexing Ring To Correct Front Driveline Angles
• Allows Clearance For Up To 37in Tires
  

Quick Specs:

• Front Lift Height 4.5in
• Rear Lift Height 2.5in
• Material Steel
• Front Lift Method Strut Spacers
• Rear Lift Method Coil Springs
• Lift Type Lift Kit
• Wheel Size 20 X 9
• Back Spacing 4.5in
• Max Tire Size 35 X 12.5
• Wheel Size 2 20 X 9
• Back Spacing 2 5.5in
• Max Tire Size 2 37 X 12.5
• Finish Powdercoat
• Metal Cutting Required Yes
• Accommodates Factory Wheels Yes

Includes:

• Coil Spring Spacers - Rear
• Coil Springs - Front
• Sway Bar Relocation Brackets
• Pitman Arm
• Hd Radius Arms
• Track Bar Brackets - Front & Rear

Up front, a pair of progressive rate, diesel-specific, 4.5in coil springs provides the extra height and smooth handling in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles, while a pair of sway bar drop brackets reposition the stock sway bar for optimal performance. Polyurethane bump stops limit up-travel, while brake line relocation brackets will allow your suspension to easily reach infull droopin. To correct the front suspension geometry at the new height, a pair of heavy-duty replacement radius arms is provided that bolt directly into the factory location. These new arms are massive upgrade to the factory stamped units, built from 1/4in American made steel, and internally gusseted with a lower cam adjustment to dial in front end caster. A heavy-duty replacement transmission crossmember as well as a transfer case indexing ring repositions the front driveline output to allow use of the factory drivelines by correcting angles and allowing you to maintain use of 4WD. In the rear, 2.5in heavy-duty coil spacers are supplied to level out the stance and allow you to retain factory ride quality without effecting tow capacity. Extended rear sway bar end links and new bump stops are included to compensate for the lift, and a track bar bracket re-centers the rear axle.

Brand: Zone OffRoad

• 2019-2022 Ram 2500 
• Will Not Fit Air-ride Equipped Models
• Diesel Models Only
• Does Not Fit Vehicles With A Manual Shift Transfer Case